Cable Cleat RFQ Checklist for Wind Turbine Projects

A cable cleat RFQ should give enough engineering data to size the body, verify short-circuit restraint and select the correct material.

Best-fit use

Wind turbine tower, transition-piece, J-tube and offshore cable-cleat procurement.

RFQ data to prepare

Cable OD and cable count
Trefoil or flat formation
Peak/RMS short-circuit current
Support spacing and mounting type
Material, liner and document requirements

Why a product name is not enough

Cable cleats are restraint components. The supplier must know cable OD, fault current and spacing to propose a meaningful part.

Material selection

SS316 is usually the conservative offshore option. Aluminum can be suitable where weight and installation speed matter.

Documents

Ask for drawings, material statements, fastener grades and any available IEC 61914 basis before purchase order release.

Cable cleat RFQ checklist for wind turbine towers and offshore cable routes: cable OD, trefoil formation, short-circuit current, spacing, material and documents.

Send project data for review →