Wind Turbine Hydraulic Pipe Clamps

Hydraulic pipe clamps in wind turbines must control vibration, pipe movement and corrosion while keeping hydraulic circuits serviceable.

Best fitNacelle, yaw, pitch and tower hydraulic circuits

Required inputPipe OD, pressure, fluid, temperature, vibration and zone

Supply definitionDIN 3015 series, insert, mounting hardware and coating

Next stepSend the pipe list for a series and insert recommendation

Best-fit use

Nacelle hydraulics, tower feed and return lines, yaw brake circuits, pitch backup circuits and offshore hydraulic service routes.

RFQ data to prepare

Pipe OD and wall thickness
Pressure and fluid
Temperature and vibration zone
Clamp series and insert material
Hardware, coating and documents

Why hydraulic clamps are different

Hydraulic routes carry pressure, pulsation and vibration. The clamp selection must consider insert hardness, spacing and mounting stiffness, not only pipe diameter.

DIN 3015 starting point

DIN 3015 gives a useful series framework. Wind projects usually add corrosion, documentation and vibration requirements on top of the catalogue size.

RFQ direction

Send a pipe list with OD, fluid, pressure and turbine zone. This is enough for an engineering response with series, insert and hardware recommendations.

Procurement document pack

Use the public company certificate now. Product-specific drawings, CAD and inspection evidence are released against the selected series and project requirements.

Public downloadISO 9001 certificateCurrent company quality-management certificate. This is not a product approval or project-specific test report.Download PDF →Available on requestProduct data and dimension drawingSeries data sheet, envelope dimensions, mounting interface and kit definition matched to the requested size.Request document pack →Project-specificCAD, material and test evidenceSTEP/IGES where available, EN 10204 documents and applicable inspection or test records for the offered configuration.Send requirements →

Document availability depends on series, material, size and order scope. Standards and test durations are confirmed in the quotation; no generic certificate is presented as product approval.

Wind turbine hydraulic pipe clamps for nacelle, tower, yaw and pitch circuits. Specify by pipe OD, pressure, vibration, insert material and corrosion class.

Send project data for review →